Adopt imported square guide rail ,double row slide block and the imported ball screw makes the machine working steadily ,high precision and long life time.
*With advanced DSP system,operated with the USB handle ,convenient operation ,humanization design.
*Compatible with Type3/ artcam/castmate/proe/coreldraw/wentai and other CAD/CAM software
*Adopt high speed stepper motor and drivers and two motors for the Y axis,max speed can reach to 35m/min,auto aligning system.
Applicable industry :
Woodworking industry ,3D wave board processing,Cupboard doors,craft wooden doors,unpainting door,screen,crafts windows,milling and engraving on the furniture.
Applicable materials :
MDF,wooden plate,veneer,wood ,application,PVC.
This machine X,Y axis is gear transmission, Z axis Taiwan TBI ball screw, it is high accuracy and precision and stability, most factory using the round rail , it is not stability when you engraving on the MDF and Wood and accuracy is not good. So please note this point.
Machine accuracy and precision is high or not, not decided by the spindle power, it decided the square rail and ball screw. And other parts.
(2) 3kw change sheng Water cooling spindle can cut more than 50MM thickness wood and MDF, in fact it aslo can cut 30mm-50mm, using a good quality straight knife to cut 2 times or 3 times is ok, and it is smoothly. But if you want to cut 30mm or less than 30mm, it can cut down directly just one time. this machine power is:4.5kw can cut more than 40mm directly one time.
(3) This is the software who can fit for the machine. eg: Wentai has more than 30000 photos in the software, when you want to engrave or cut, just adjust the size of the photo is ok, it is conveniencefor you to work. The machine can support these of softwares. Then you use this sofe wares to design the photos then through the USB or computer to connect with the machine, it can engrave or cut(can support it)
Technical Data :
Model | 1200X900X200mm |
Working area | 1200x900x200mm |
Whole machine size | 2120mm*1520mm*1100mm |
Spindle power | water cooling spindle with 4.5kw 1 head/1 spindle |
Cooling mode | water cooling spindle with CS brand
|
Engraving speed | 8000-15000mm/min |
Spindle rotate | 6000-24000rpm/min |
Power supply | 220V±10% /50HZ3 phases 60HZ as your choice |
Graphic format supported | G code HPG U00.mmg.plt |
Software supported | March 3 type3 wentai2002/wentaiV8/Artcam |
Working table | Materials holder working table |
Stepper motor | Lead shine stepper motor |
Vaccum pump | yes |
Net Weight/gross weight | 1200kg/1480KG |